Features

  • Size: 2.0mm x 2.0mm x 0.75mm
  • Max Accuracy: Temperature sensor ±0.15°C, Relative humidity sensor ±2.0% RH
  • Digital pre-calibrated output in K and %RH
  • Wide operating range: 1.71V to 3.60V
  • Ultra-low power: Stand by current 40nA, Active current 6.6 μA @ 1Hz (1.8V)
  • Low humidity drift: 0.25%RH p.a.
  • Fast response: τT <1s, τRH <3s

Benefits

  • Small foot print
  • Ultra accurate
  • Wide operating voltage and sensing range
  • Low power
  • Cost effective

Product properties

Interface
I²C
Supply Voltage [V]
1.71 to 3.60
Consumption [µA]
6.6 @ 1 Hz (standby: 40 nA)
Dimension [mm]
2 x 2 x 0.75
Ambient Temp. Range [°C]
-40 to 100
Accuracy
±0.15°C; ±2.0%RH
Conversion Time [ms]
122

Applications

  • Home appliances: dryers, cooker hoods, refrigerators
  • Home and building climate control systems
  • Transportation condition monitoring
  • Wireless sensor nodes
  • Personal health and wellness monitoring
  • Industrial automation (e.g. server rooms)

Tools

Product name
Evaluation Kit for ENS210
Description

The ENS210 Evaluation Kit is a combination of an ENS210 shield and a USB to I²C dongle.

Product name
Evaluation Kit for CCS801
Description

The CCS801 is an analog VOC sensor for detecting VOCs (volatile organic compounds) for monitoring indoor air quality. The CCS801 Evaluation Kit is a combination of a CCS801 shield and a USB to I²C dongle. The evaluation kit connects to a Windows PC via USB port and the sensor is powered via the USB connector. It can be controlled by a Windows PC based application, which demonstrates the sensor output and calculated TVOC and equivalent CO2 values. In addition, this kit demonstrates the relative humidity and temperature values measured by the ENS210 sensor and uses this information to compensate for environmental changes during VOC detection. The PC application can also be used for logging of sensor data as well. The evaluation kit can also be used for quick integration into end customer’s application. The CCS801 evaluation kit comes with an extensive set of documentation such as a quick start guide, a user manual, application notes and reference drivers for easy design in etc.

Product name
Evaluation Kit for CCS811
Description

The CCS811 Evaluation Kit combines a CCS811 sensor board and an USB to I²CIO board and connects directly to a Windows PC via USB port. It can be controlled by a Windows PC based application, which demonstrates the sensor output with calculated values for TVOC and equivalent CO2. In addition, this kit demonstrates the relative humidity and temperature values measured by the ENS210 sensor and uses this information to compensate for environmental changes during VOC detection. The PC application can also be used for logging of sensor data as well. The evaluation kit can also be used for quick integration into end customer’s application. The CCS811 evaluation kit comes with an extensive set of documentation such as a quick start guide, a user manual, and application notes for easy design in etc.

Product name
Windows ENS Dashboard
Description

The ENSDashboard is a Windows application that supports monitoring and logging of sensor measurements. It also supports a selection of various operation modes and firmware updates. The ENSDashboard is used for the evaluation kits of relative humidity & temperature sensor ENS210 as well as air quality sensors CCS801 & CCS811. Here you will find the user manual. The software itself can be downloaded here [https://github.com/sciosense/ENSdashboard]